AN5800/40 eccentric module
AN5800/40 eccentric module
Classification:
Product Description
Technical Data
1. Sensor Input:
Eddy Current Sensor:
Sensitivity: 8V/mm, ±1mm range;
Output Voltage Range: -2 to -18VDC;
Initial Installation Zero Voltage: -10VDC.
Note: One eddy current sensor needs to be installed for both key phase and eccentricity, outputting key phase signal and eccentricity signal to the module's eccentric channel and key phase channel respectively.
2. Measurement Range:
Eccentricity Range: 0 to 999μm (Peak-to-Peak: Pk-Pk) Accuracy: ±0.5%±1μm
Key Phase Output: TTL Level Signal
3. Module Power Supply:
DC Power Supply: 24VDC (18 to 36V)
Module Power Consumption: Less than 5W
4. Standard Signal Output:
Standard Current: 4 to 20mA (corresponding to full-scale upper limit)
Active Type: Drive Load: ≤500Ω, Effective Transmission Distance: ≤300 meters (1000 feet).
5. Switch Quantity Output:
(Alert, Danger) Two-level threshold programmable settings and normally open/normally closed dry contact output, full range can be set, error ≤0.1%;
Insulation Resistance: ≥1000MΩ;
(Contact Capacity): 2A/30VDC, 1A/220VAC; Double Pole Double Throw (DPDT);
(Alarm Delay): From 0.1 to60S, default value:0.5S;
(Alarm Lockout): Default is non-locking.
(Key Phase Channel): Only Not-ok relay contact output
6、物理特性：
(Front Panel Size): (Length × Width × Height)248mm×40mm×262mm;9.8in×1.5in×10.3in
(Weight):600g
(Rear Panel Size): (Length × Width × Height)128 mm×40mm×262mm;5in×1.5in×10.3in
(Weight):300g
7、环境限制：
(Operating Temperature): -30℃～+65℃ (-22oF～+150 oF)
(Storage Temperature): -40℃～+85℃ (-40oF～+180 oF)
(Relative Humidity):0～95% non-condensing
Referencing Execution Standards
American Petroleum Institute API670 standard;
Safety Certification:C E;
Electromagnetic Interference Resistance：EMC\ LVD;
Referencing EN55011\ EN61010\EN50081\EN50082.
Product Selection
AN5800/40 -AXX-BXX-CXX
A：Channel Selection
00—Dual Channel (Key Phase, Eccentricity)
01—Single Channel (Used only as Key Phase)
B：Sensor Selection
00—φ8/φ5 Diameter Eddy Current Sensor
C：Relay Output Selection (Eccentric Channel)
00—Three DPDT Dry Contact Outputs (Alert, Danger, Not-ok)
01—Two DPDT Dry Contact Outputs (Alert, Danger)
02—Single DPDT Dry Contact Output (Alert)
03—No Relay Output
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
