AN5800/50 thermal expansion module
Classification:
Product Description
Technical Data
1. Sensor Requirements:
LVDT Sensor
Sensitivity: 400mV/mm, 200mV/mm for 0-25mm range, 0-50mm range
Output Voltage Range: 0-10VDC
2. Measurement Range:
0-25.0mm range
0-50.0mm range
Accuracy: ±0.5%±0.01 mm
Note: Different measurement ranges require different models of sensors.
3. Module Power Supply:
DC Power Supply: 24VDC (18-36V)
Module Power Consumption: Less than 5W
4. Standard Signal Output:
Standard Current: 4-20mA (corresponding to full-scale upper limit)
(Active type: Drive load: ≤500Ω, effective transmission distance: ≤300 meters (1000 feet).)
5. Relay Output:
(Two-level thresholds (Alert, Danger) programmable settings and normally open/closed dry contact output, full-scale range can be set, error ≤0.1%;)
(Insulation Resistance: ≥1000MΩ;)
(Contact Capacity: 2A/30VDC, 1A/220VAC; Double pole double throw (DPDT);)
(Alarm Delay: From 0.1 to 60S, default value: 0.5S;)
(Alarm Lockout: Default is non-locking.)
6. Physical Characteristics:
(Front Panel Size: (L×W×H)248mm×40mm×262mm,9.8in×1.5in×10.3in)
(Weight:600g)
(Rear Panel Size:(L×W×H)128 mm×40mm×262mm,5in×1.5in×10.3in)
(Weight:300g)
7. Environmental Limitations:
(Operating Temperature:-30℃～+65℃(-22oF～+150 oF))
(Storage Temperature:-40℃～+85℃(-40oF～+180 oF))
(Relative Humidity:0～95% non-condensing)
Refer to the execution standard
API Standard API670;
Safety Certification:C E;
Electromagnetic Interference Resistance：EMC\ LVD;
Refer to EN55011\ EN61010\EN50081\EN50082.
Product Selection
AN5800/50 -AXX-BXX-CXX
A：Channel Selection
00—Dual Channel
01—Single Channel (default is channel A on the top of the module)
B：Sensor Selection
25—0～25mm LVDT Sensor
50—0～50mm LVDT Sensor
XX—Other Measurement Ranges (Remarks)
C：Relay Output Selection
00—Three DPDT dry contact outputs (Alert、Danger、Not-ok)
01—两个DPDT干接点输出(Alert、Danger)
02—单个DPDT干接点输出(Alert)
03—无继电器输出
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
