AN3530 Speed Monitoring Protection Device
AN3530 speed protection transmitter
Classification:
Product Description
Technical Data
1. Sensor Requirements:
Magnetic Electric Sensor: Passive type, outputs pulse signals that vary proportionally with the frequency of the rotational speed; installation gap 1mm ±0.2mm.
Magnetoresistive Sensor: Active type, outputs TTL level signals that vary proportionally with the frequency of the rotational speed; installation gap: 2.5mm ±0.5mm.
Eddy Current Sensor: Sensitivity: 7.87mV/μm (200 mV/mil), GAP voltage: -10VDC.
Note: The installation gap is determined by the mechanical distance of 1mm between the tooth tip and the probe or the output voltage of the front-end device -10VDC, with priority given to mechanical distance to avoid damage to the probe due to shaft eccentricity.
2. Measurement Range:
Standard Rotational Speed: Range: 0～9999rpm, Accuracy: ±0.5%±1 rpm
Zero Rotational Speed: Range: 0～99.99rpm, Accuracy: ±0.5%±0.01rpm
Note: The range can be set through on-site programming.
3. Power Supply:
DC Power Supply: 24VDC (18～36V);
AC Power Supply: 220VAC (165～260)/47～63Hz;
AC Power Supply: 110VAC /47～63Hz;
Total Power Consumption: 5W.
4. Standard Signal Output:
Standard Current: 4～20mA (corresponding to full-scale upper limit)
(Active type): Drive load: ≤500Ω, effective transmission distance: ≤300 meters (1000 feet).
5. Relay Output:
(Two-level thresholds Alert, Danger) programmable settings and normally open/normally closed dry contact output, full range can be set, error ≤0.1%;
(Insulation resistance): ≥1000MΩ;
(Contact capacity):2A/30VDC, double pole double throw (DPDT);
(Alarm delay): from 0.1 to60S, default value is :0.5S;
(Alarm lockout): Default is non-locking.
6. Physical Characteristics:
Dimensions(Length x Width x Height):120mm×70mm×80mm;
Weight :0.8Kg.
7.Installation Method:
Standard rail mounting:DIN35mm;
Base plate mounting :100mm×80mm.
8.Environmental Limitations:
Operating Temperature:-30℃~+65℃;
Storage Temperature:-40℃~+85℃;
Relative Humidity :0~95% non-condensing.
9.Reference Execution Standards
American Petroleum Institute API670 standard;
Safety Certification:C E;
Protection Level :IP56;
Electromagnetic Interference Resistance :EMC\ LVD reference EN55011\ EN61010\EN50081\EN50082.
产品选型
AN3531/32—转速/零转速/键相
AN 3531- AXX-BXX-CXX-DXX-EXX-FXX
AN 3532- AXX-BXX-CXX-DXX-EXX-FXX
AN 3533- AXX-BXX-CXX-DXX-EXX-FXX
标准配置型号：
转速：AN3531-00-00-00-00-00-00-60
零转速：AN3532-00-01-00-00-00-00-60
键相：AN3533-00-01-00-02-00-00-01
A：量程范围
00—0～9999rpm标准
01—0～99.99rpm零转速
02—其它(备注说明)
Note: The range can be set through on-site programming.
B：外接传感器类型
00—无源型磁电式探头
01—有源型磁阻探头
02—电涡流传感器(φ5/φ8直径探头)
03—其它厂家同类型探头
注：标准转速推荐使用磁式探头，零转速时采用有源磁阻探头或电涡流探头(φ8/φ5直径)。
C：继电器输出(DPDT):
00—两个干接点输出(Alert，Danger)
01—单个干接点输出(Alert)
02—无继电器输出
D:标准信号输出:
00—4～20mA标准电流输出
01—1～5V标准电压输出
02—RS 485通讯接口输出
03—Others
E: Power Supply
00—24VDC (18～36V)
01—220VAC
02—110VAC
03—Others
F: Installation Method
00—DIN35mm Rail Mounting
01—Base Mounting
G: Number of Teeth (Number of Keys or Slots)
01—1 piece
60—60 pieces
XX—Others (the number in this option represents the number of teeth)
Note: If other options are selected for the model, please provide a note. For details, please consult the company's technical support department.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
