AN5800/20 Displacement Module
AN5800/20 Displacement Module
Classification:
Product Description
Technical Data
1. Sensor Input:
Eddy Current Sensor
Sensitivity: 8V/mm, ±1mm range, 4V/mm, ±2mm range, 0.8V/mm, ±5mm range, 1V/mm, ±8mm range, 0.8V/mm, ±10mm range
Output Voltage Range: -2 to -18VDC, GAP Voltage: -10VDC
2. Measurement Range:
Displacement Range: -1.00 to +1.00mm\-2.00 to +2.00mm
Expansion Difference Range: -5.00 to +5.00mm\-8.00 to +8.00mm\-10.00 to +10.00mm
Accuracy: ±0.5%±0.01 mm
Note: Different range requires different models of sensors. Typically available in φ5mm, φ8mm, φ11mm.
3. Module Power Supply:
DC Power Supply: 24VDC (18–36V)
Module Power Consumption: less than 5W
4. Standard Signal Output:
Standard Current: 4–20mA (corresponding to full-scale upper limit)
(Active Type): Drive Load: ≤500Ω, Effective Transmission Distance: ≤300 meters (1000 feet).
5. Relay Output:
(Four-level Threshold (H-Alert, H-Danger, L-Alert, L-Danger) programmable settings and normally open/normally closed dry contact output; full-scale range can be set; error ≤0.1%;)
(Insulation Resistance: ≥1000MΩ;)
(Contact Capacity: 2A/30VDC, 1A/220VAC; Double Pole Double Throw (DPDT);)
(Alarm Delay: from 0.1 to 60S; default value: 0.5S;)
(Alarm Lockout: default is non-locking.)
(6. Physical Characteristics:)
(Front Panel Size: (L×W×H)248mm×40mm×262mm /9.8in×1.5in×10.3in)
(Weight:600g)
(Rear Panel Size:(L×W×H)128 mm×40 mm×262 mm /5in×1.5in×10.3in)
(Weight:300g)
(7.Environmental Limitations:)
Operating Temperature:-30℃～+65℃(-22oF～+150 oF)
Storage Temperature:-40℃～+85℃(-40oF～+180 oF)
Relative Humidity：0～95% non-condensing
Referencing Execution Standards
American Petroleum Institute API670 standard;
Safety Certification：C E;
Electromagnetic Interference Resistance：EMC\ LVD;
Referencing EN55011\ EN61010\EN50081\EN50082.
Product Selection
AN5800/20-AXX-BXX-CXX
A：Channel Selection
00—Dual Channel
01—Single Channel (default is channel A on the top of the module)
B：Sensor Selection
00—φ8 or φ5 diameter eddy current sensor
01—φ11 diameter eddy current sensor
02—φ25 diameter eddy current sensor
03—φ32 diameter eddy current sensor
C：Relay Output Selection
00—Three DPDT dry contact outputs (H-Low-Alert, High-Low-Danger、Fault-Not-ok)
01—Two DPDT dry contact outputs (High-Low-Alert and High-Low-Danger)
02—Single DPDT dry contact output (High-Low-Alert or High-Low-Danger)
03—Two DPDT dry contact outputs (High-Alert、High-Danger)
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
